ENGLISH • 21
Relling and using detergent
When using detergent, the adjustable nozzle must be
set on “ “ (on models with this feature). Fill the tank with
highly degradable detergent.
Recommended cleaning procedure
Dissolve dirt by applying the detergent mixed with water
to the surface while still dry. When dealing with vertical
surfaces work from the bottom upwards. Leave the
detergent to act for 1-2 minutes but do not allow the
surface to dry. Starting from the bottom, use the high
pressure jet at a minimum distance of 30cm. Do not allow
the rinse water to run onto unwashed surfaces.
MAINTENANCE
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
Caution! Always disconnect the plug from the power
socket before carrying out any work on the appliance.
Cleaning the nozzle (Fig. F)
1. Disconnect the lance from the nozzle.
2. Remove any dirt deposits from the nozzle hole using
the tool (13).
Cleaning the filter (Fig. H)
Clean the suction filter and the detergent lter after every
50 hours of operation.
Unjamming the motor
(On models with this feature)
In case of lengthy stoppages, limescale sediments may
cause the motor to seize. To unjam the motor, turn the
drive shaft with a tool.
End-of-season storage
Treat the appliance with non-corrosive, non-toxic
antifreeze before storing it away for winter.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
PW1700
Power
1700W
Output
6,2 l/min
Pressure
100 Bar/10 MPa
Maximum pressure
130 Bar/13 MPa
1885 PSI
T° input
50 ºC
Maximum input pressure
1 MPa
Repulsive force of the gun
to the maximum pressurea 10,2 N
Motor insulation
Class F
Motor protection
IPX5
Voltage:
AR, B2C
220V ~ 50Hz
B3
120V ~ 60Hz
B2
220V ~ 60Hz
BR
127V ~ 60Hz
Sound level:
L
PA
(EN 60704-1)
78,77 dB(A)
L
WA
(EN 60704-1)
87 dB(A)
Unit vibrations
3,72 m/s
2
Weight
11 kg
