Black & Decker M290, Руководство пользователя

Страница: 4 / 20

4
ENGLISH
Fig. A
5. Bowl (M600)
6. Stand (M600)
7. Beaters
8. Dough hooks
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Fitting and removing accessories (fig. A & B)
◆
Use beaters for mixing, beating, whipping and creaming
liquids and mixtures.
◆
Use dough hooks for mixing and kneading dough.
Fitting
◆
Insert the stem of the accessory marked with the washer
(9) into the corresponding mounting hole (10) in the motor
unit as shown.
◆
Push and turn the accessory until it locks into place.
◆
Repeat for the other accessory.
Removing
◆
Press the release button.
◆
Remove the accessories from the motor unit.
M600 - Using the stand (fig. C - E)
Removing and replacing the bowl (fig. C)
◆
Pull the lug (11) away and tilt the rest (12) into raised
position.
◆
Take the bowl off the stand (6).
Installing and removing the appliance (fig. D)
◆
Place the appliance into the rest (12) as shown.
◆
While supporting the rest with one hand, firmly push the
front of the appliance down until it clicks in place. Then
push the rear of the appliance down until it fits tightly.
◆
To remove the appliance, pull the lug (13) away and lift
the appliance from the rest. If there are any accessories
fitted, these must be removed first.
Fitting and removing accessories (fig. E)
◆
Place the appliance into the rest (12) as shown.
◆
Pull the lug (11) away and tilt the rest (12) into raised
position.
◆
Follow the instructions as described above to fit or
remove accessories.
Use
Switching on and off
◆
To switch on, move the speed control switch to one of the
positions
1 (lowest speed) to 5 (highest speed).
It is recommended to start at a low speed, then change to
a higher speed if necessary.
◆
If required, press the turbo button (2) for extra power.
◆
To switch off, move the switch to position 0 .
◆
Warning! Do not operate the appliance continuously for
more than 5 minutes. Do not operate the appliance
continuously in turbo mode for more than 1 minute.
After operating the appliance continuously for 5 minutes
(or 1 minute in turbo mode) let it cool down for at least
5 minutes before operating it again.
◆
When working with liquids, use a low speed in order to
avoid splashing liquid onto the appliance.
Speed settings
Speed Application Ingredients
1, 2 Folding Bulk and dry foods, e.g.
flour, butter, potatoes
3 Blending Salad dressings
4 Mixing Cakes, cookies, quick breads
5 Creaming and beating Butter, uncooked candy,
desserts
The turbo button (2) can be used in all speed settings and
applications for any of the ingredients, except flour.
Cleaning and maintenance
Warning! Before cleaning and maintenance, switch the
appliance off and unplug it.
◆
Wash the beaters and dough hooks in warm soapy water
and dry well.
◆
Wipe the motor unit with a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Warning! Do not immerse the appliance in water or any other
liquid.
M600 - Cleaning the stand
◆
Wash the bowl in warm soapy water. Dry the bowl with a
soft cloth.
◆
Wipe the stand with a damp cloth. Do not use any
abrasive or solvent-based cleaner.