Black & Decker M290, Руководство пользователя

Страница: 3 / 20

3
ENGLISH
Intended use
Your Black & Decker hand mixer has been designed for mixing,
beating, whipping and kneading food and beverage
ingredients.This product is intended for household use only.
Safety instructions
◆
Warning! When using mains-powered appliances, basic
safety precautions, including the following, should always
be followed to reduce the risk of fire, electric shock and
personal injury.
◆
Read this entire manual carefully before using the appliance.
◆
The intended use is described in this manual. The use of
any accessory or attachment or the performance of any
operation with this appliance other than those recommended
in this instruction manual may present a risk of personal
injury.
◆
Retain this manual for future reference.
Using your appliance
◆
Make sure that the appliance is switched off before
connecting to or disconnecting from the power supply.
◆
Always take care when using the appliance.
◆
Do not use the appliance outdoors.
◆
Always protect the motor unit from water or excessive
humidity.
◆
Do not operate the appliance if your hands are wet.
Do not operate the appliance if you are barefoot.
◆
Do not touch moving parts. Keep long hair and loose
clothing out of the way of the moving parts.
◆
Guide the power supply cord neatly so it does not hang
over the edge of a worktop and cannot be caught
accidentally or tripped over.
◆
Never pull the power supply cord to disconnect the plug
from the socket. Keep the power supply cord away from
heat, oil and sharp edges.
◆
Switch off and wait for the motor to stop running before
disconnecting the appliance from the power supply.
◆
Never detach any part or accessory while the appliance is
still connected to the power supply. Always disconnect
the appliance from the power supply first.
◆
Never clean the beaters or dough hooks under running
water while they are still connected to the main body.
◆
Take care that the beaters or dough hooks do not touch
the power cable while operating the appliance.
◆
If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.
◆
Disconnect the appliance from the power supply when not
in use, before fitting or removing parts and before cleaning.
Safety of others
◆
Do not allow children or any person unfamiliar with these
instructions to use the appliance.
◆
Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
Close supervision is necessary when the appliance is
used near children.
After use
◆
Switch off and remove the plug from the socket before
leaving the appliance unattended and before changing,
cleaning or inspecting any parts of the appliance.
◆
When not in use, the appliance should be stored in a dry
place. Children should not have access to stored appliances.
Inspection and repairs
◆
Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
◆
Do not use the appliance if any part is damaged or defective.
◆
Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
◆
Before use, check the power supply cord for signs of
damage, ageing and wear.
◆
Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
◆
If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard. Do not cut the power
supply cord and do not attempt to repair it yourself.
◆
Never attempt to remove or replace any parts other than
those specified in this manual.
Double insulation
This appliance is double insulated in accordance
with EN 60335; therefore no earth wire is required.
Always check that the power supply corresponds to
the voltage on the rating plate.
To avoid the risk of electric shock, do not immerse
the cord, plug or motor unit in water or other liquid.
Features
1. Speed control switch
2. Turbo button
3. Release button
4. Mounting holes for beaters/dough hooks