How to Whip Cream
• Cream, Beaters and Bowl must be thor-
oughly chilled.
• Start with lowest setting (to minimise spat-
ter); as the cream begins to thicken, grad-
ually increase to WHIP (speed setting 5).
• Whipping time varies with fat content, age
and temperature of cream.
How to Knead Dough
• For best results use the Mixer on the stand.
• ALWAYS USE SPEED SETTING 1
WHEN USING DOUGH HOOKS.
• To help combine dry ingredients use a rub-
ber or plastic spatula to scrape the side of
the Bowl. Keep spatula well away from the
moving parts.
• DO NOT attempt to feed the dough into
the Dough Hooks with your hands during
operation.
• When the bread dough is being kneaded, it
forms into an elastic ball (rather than
being spread out like a cake batter). The
Dough Hooks will move through the
dough as one mass as it nears the end of
the kneading process.
• During kneading, the overhead arm may
lift slightly and the Bowl may wobble a lit-
tle. If these conditions occur excessively
you may need to reduce the load.
• DO NOT use a mixture containing more
than 2 cups of flour as this will overload
the Mixer.
• WE RECOMMEND KNEADING FOR
NO MORE THAN 4 MINUTES.
Removing Beaters or
Dough Hooks
Unplug the Mixer. Set the speed control
to OFF position.
Scrape excess mixture from
the Beaters or Dough Hooks with a plastic
spatula.
Grasp stems of Beaters or Dough Hooks
with hand and lift the Beater Eject Lever.
Beaters or dough Hooks will unlock for easy
removal.
Removing Mixer
from Stand
Unplug the Mixer. Set the speed to OFF
position.
Press the overhead arm unlock but-
ton and raise the arm. Slide the Mixer care-
fully away from the stand. The Mixer should
slide easily.
Care and Cleaning
Other than the care mentioned, no other
maintenance or servicing of this appliance is
required. Repairs, if necessary, must be per-
formed by a Black & Decker Company
Owned or Authorised Service Centre.
General Cleaning
1.
Before cleaning any part of the Mixer or
Stand, move the Speed Control Switch to
the OFF position, then unplug the Cord
from the outlet and eject the Beaters. Be
sure to dry all parts thoroughly before you
use them again.
2.
The Beaters, Dough Hooks and Mixing
Bowl may be washed in hot, soapy water or
in a dishwasher. (Place on top shelf of
dishwasher).
3.
The Stand, Mixer, Turntable and Cord can
be cleaned with a damp cloth. To remove
stubborn spots, wipe surfaces with a cloth
slightly dampened in soapy water or a
mild, non-abrasive cleaner. Follow with a
clean damp cloth. DO NOT use any abra-
sive cleaner or material to clean any part
of the Mixer or Stand as it may scratch the
finish.
NEVER IMMERSE THE MOTOR UNIT, CORD
OR TURNTABLE IN ANY LIQUID.
Service or Repair
Need Help?
Service, if necessary, must be performed by
a Black & Decker Household Appliance
Company-Owned or Authorized Service
6
