5
FUNCTIONAL DESCRIPTION
Figure A
1. On/Off Switch
2. Fluorescent Tube
3. Removable Cap
4. Fluorescent Tube Access Screws
5. Handle Release Button
6. Moveable Handle
7. Bungee Cord Hanger
8. Battery (not included)
3
1
2
4
5
6
4
7
8
A
BATTERY CAP INFORMATION
Battery storage and carrying caps are provided for use whenever the battery is out of the
tool or charger. Remove cap before placing battery in charger or tool.
WARNING:
Fire hazard. Do not store or carry battery so that metal objects can
contact exposed battery terminals
. For example, do not place battery in aprons,
pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.
without battery cap.
Transporting batteries can possibly cause fires if the battery
terminals inadvertently come in contact with conductive materials such as keys,
coins, hand tools and the like.
The US Department of Transportation Hazardous
Material Regulations (HMR) actually prohibit transporting batteries in commerce or on
airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly
protected from short circuits. So when transporting individual batteries, make sure that
the battery terminals are protected and well insulated from materials that could contact
them and cause a short circuit.
Battery Cap
Capuchon du bloc-pile
Protector de la batería
•
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................volts
A ..................amperes
Hz................hertz
W..................watts
min ..............minutes
................alternating current
............direct current
no ................no load speed
................Class II Construction
................
earthing terminal
(double insulated)
..............safety alert symbol
.../min ..........revolutions or reciprocations
per minute
90517816 FS18AL 4/2/07 1:38 PM Page 5
