Size: 19.685"
x 17.5"
Please Read and Save this Use and Care Book
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
❍
Read all instructions.
❍
To protect against risk of electrical shock do not immerse cord,
plugs or appliance in water or other liquid.
❍
Close supervision is necessary when any appliance is used by or
near children.
❍
Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
❍
Avoid contacting moving parts.
❍
Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner. Return appliance to the nearest authorized service
facility for examination, repair or electrical or mechanical
adjustment. Or, call the appropriate toll-free number on the cover
of this manual.
❍
The use of attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury.
❍
Do not use outdoors.
❍
Do not let cord hang over edge of table or counter.
❍
Do not let cord contact hot surface, including the stove.
❍
Do not open pressurized (aerosol-type) cans.
❍
Do not open cans of flammable liquids such as lighter fluids.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric
shock, do not attempt to remove the outer cover. There are no
user-serviceable parts inside. Repair should be done only by authorized
service personnel.
ELECTRIC CORD
a) A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord.
b Longer detachable power-supply cords or extension cords are available
and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord
or extension cord should be at least as great as the electrical
rating of the appliance,
2) If the appliance is of the grounded type, the extension cord should
be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over
the countertop or tabletop where it can be pulled on by children
or tripped over.
Note:
If the power supply cord is damaged, it should be replaced by
qualified personnel or in Latin America by an authorized service center.
MOD
eL/M
ODÈL
e
❍
EC4
75C
ExTRA
-TALL
Can Opener
Très grand
OUVRE-BO
îTE
For
online customer servic
e
and to
regis
ter
your pr
oduct, go to
www.pr
odprot
ect.com/applic
a
Customer
Care
Line:
USA/Canada
1-800-231-9786
Acces
sories/Parts
(USA / Canada)
Acces
soires/Pièc
es
(É.U. / Canada)
1-800-738-0245
Product may vary slightly from what is illustrated.
How to Use
This product is for household use only.
BEFORE FIRST USE
• Remove the cutting assembly from cardboard insert.
• Please go to www.prodprotect.com/applica to register your warranty.
• Attach cutting assembly by aligning key tab with key
slots
(A)
.
• Push in and turn until cutting assembly locks into
position.
OPENING CANS
1. Plug the cord into a standard, 120-volt electrical outlet.
2. Lift the lever. Tip the can so that the rim is under the locating post.
3. Push down on the lever, making sure the cutter blade is inside the rim.
Note:
It is not necessary to hold the lever down or support the can during cutting.
However, you may have to hold the base when cutting very tall or heavy cans.
4. When the can is opened, the cutting automatically stops.
5. Remove can by holding it with one hand and raising the Lever with the other.
Caution: Avoid contact with the cut edges of the can or lids-they are sharp.
Carefully remove the lid from the magnet and discard.
6. Stuff excess cord back inside the bottom of the unit and feed the cord through
the notch for storage.
Note:
This can opener will not open rimless cans or cans with angled corners. It
should not be used to open cans with a peel-off foil or
rolling key.
Note:
Frozen juices or foods in cardboard cans should be opened as soon as they
are removed from the freezer. Aluminum lids will not stick to the magnet.
POP TOP OPENER
For use on cans with a pull ring
1. Remove pop top opener. Wedge the flat end of the pop top
opener under the ring and lift up
(B)
.
2. Manually pull the ring back to remove the lid or hook the
Pop-Top Opener under the ring, pull back on the Pop-Top
Opener and pop off the lid
(C)
.
NEED HELP?
For servic
e, repair or any ques
tions regar
ding your applianc
e, call the appr
opriate
800 number on cov
er of this book. Please
DO NOT
return the pr
oduct to the plac
e
of purchase. Also, pl
ease
DO NOT
mail product back t
o manufactur
er, nor bring it
to a servic
e cent
er. Y
ou may also want to c
onsult the websit
e listed on the c
over of
this manual.
Tw
o-Year Limit
ed Warr
anty
(Applies only in the Unit
ed Stat
es and Canada)
What does it cov
er?
•
Any defect in mat
erial or workmanship pr
ovided; ho
wev
er, Applica’
s liability will
not exc
eed the purchase pric
e of product.
For ho
w long?
•
Tw
o year
s after dat
e of purchase.
What will we do t
o help you?
•
Provide y
ou with a reasonabl
y similar replac
ement product that is either ne
w or
fact
ory refurbished.
How do y
ou get service?
•
Save y
our rec
eipt as proof of dat
e of sale.
•
Visit the
online servic
e w
ebsite
at www
.prodpr
otect.c
om/applica,
or call
toll-fr
ee
1-800-231-9786, for gener
al warranty servic
e.
•
If you need parts or ac
ces
sories, please c
all 1-800-738-0245.
What does your warr
anty not cov
er?
•
Damage from c
ommercial use
•
Damage from misuse, abuse or negl
ect
•
Products that hav
e been modified in any way
•
Products used or servic
ed outside the country of pur
chase
•
Glass parts and other ac
ces
sory items that ar
e packed with the unit
•
Shipping and handling cos
ts associat
ed with the replac
ement of the unit
•
Consequential or incidental damages (Pl
ease note, ho
wev
er, that some stat
es
do not allow the e
xclusion or limit
ation of consequential or incident
al damages,
so this limitation may not appl
y to y
ou.)
How does s
tat
e law relat
e to this warr
anty?
•
This warranty giv
es you specific l
egal rights. You may also hav
e other rights that
vary fr
om stat
e to s
tat
e or provinc
e to pr
ovinc
e.
is a regis
ter
ed trademark of The Black & Deck
er Corporation,
Towson, Maryland, USA
Made in Peopl
e’s Republic of China
Printed in P
eople’
s Republic of China
2009/9-16-27e/F
Printed
on recy
cled
paper.
Imprimé sur
du papier
recy
clé.
Copyright ©
2009 Applic
a Consumer
Products,
Inc.
BOTTLE
OPENER
1. F
or use
only
in the
remo
val
of met
al bottl
e caps.
Do not
use it
for
screw-off
caps,
punch in
tabs
or cans
with pull
rings.
2. T
o open
a bottl
e, position
the cap
under the
metal
"hook" in
the bottl
e opener
.
Important:
Be sur
e the
"hook" is
not under
the bottl
e neck
or the
glass
may br
eak.
3. Pull
down
to
pop the
cap
off
(D)
.
KNIFE
S
HARPENING
1. The
slot
in the
Knife
Sharpener is
slanted
for
left
or right-
handed use.
2. F
or bes
t results,
sharpen the
entire
blade length
in one
continuous
str
oke
car
efully
pulling the
blade thr
ough
the sl
ot and
slightly
up to
wards
you
(E)
. Repeat
until you
achieve
desired
sharpness.
Wash
and dry
knives
after
sharpening. Use
caution
with blade
after
sharpening.
Knife
Sharpening Tips
•
Clean
and dry
knives
befor
e sharpening.
•
Do not
attempt
to
sharpen serr
ated
blades, as
this will
smooth their
edges.
•
Do not
attempt
to
sharpen scis
sors.
Care
and Cl
eaning
This pr
oduct cont
ains no
user servic
eable
parts. Ref
er servic
e to
qualified servic
e
personnel.
1. Unplug
the can
opener bef
ore
cleaning.
2. Remo
ve
the cutting
assembl
y by
lifting the
lev
er up
and pulling
the cutting
assembl
y out
(A)
.
3. W
ash it
by hand
in warm,
sudsy wat
er; rinse
and dry
thoroughl
y.
4. Bef
ore
replacing
the cutting
assembl
y, wipe
the can
opener ext
erior, and
area
around
the driv
e wheel
with a
slightly
damp cl
oth or
sponge.
1. Lever
† 2. Removable cutting assembly (Part # 178180-00)
3. Bottle opener
4. Extra-tall base
5. Cord storage (under unit)
6. Locating post
† 7. Pop-top opener (Part # 178180-POP)
8. Knife sharpener
Note: †
indicates consumer replaceable/removable parts
A
Key
Tab
Key
Slots
B
C
D
E
