background image

2

3

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safety precautions should always be followed, including the following:

•  READ ALL INSTRUCTIONS BEFORE USING.
•  Use iron only for intended use. 
•  To protect against risk of electric shock, do not immerse the iron in 

water or other liquids.

•  The iron temp. dial should be turned to the minimum setting 

 

before plugging in or unplugging from the outlet. Never yank cord to 

disconnect from the outlet; instead grasp plug and pull to disconnect. 

•  Do not allow cord to touch hot surfaces. Let iron cool completely before 

putting away. Loop cord loosely around iron when storing. 

•  Always disconnect iron from electric outlet before filling with water, 

cleaning, or emptying and when not in use. 

•  Do not operate the iron if it has been dropped, if there are visible signs 

of damage to the iron or its cord, or if it’s leaking. To avoid the risk of 
electric shock, do not dissemble the iron; take it to a qualified service 
person for examination and repair, or call the appropriate toll-free 
number on the cover of this manual. Incorrect reassembly can cause 
risk of electric shock when the iron is used. 

•  Close supervision is necessary for any appliance being used by or 

near children. Do not leave iron unattended when plugged in or on an 
ironing board. 

•  Burns can occur from touching hot metal parts, hot water, or steam. 

Use caution when you turn a steam iron upside down—there might be 

hot water in the reservoir. Avoid rapid movement of iron to minimize 

hot water spillage.

•  This appliance is not intended for use by persons (including children) 

with reduced physical, sensory, or mental capabilities, or lack of 
experience and knowledge, unless they have been given supervision 

or instruction concerning use of the appliances by a person 
responsible for their safety.

•  Children should be supervised to ensure that they do not play with the 

appliance. 

•  The iron must be used and rested on a stable surface.
•  When standing the iron on its heel, ensure that the surface on which 

the iron is placed is stable. 

SPECIAL INSTRUCTIONS

•  To avoid circuit overload, do not operate another high wattage 

appliance on the same circuit.

•  If an extension cord is absolutely necessary, a 15-ampere cord should 

be used. Cords rated for less amperage can result in a risk of fire or 
electrical shock due to overheating. Care should be taken to arrange 
the cord so that it cannot be pulled or tripped over. 

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the 

other). To reduce the risk of electric shock, this plug is intended to fit 

into a polarized outlet only one way. If the plug does not fit fully into 

the outlet, reverse the plug. If it still does not fit, contact a qualified 

electrician. Do not attempt to modify the plug in any way.  

TAMPER-RESISTANT SCREW

Warning:

 This appliance is equipped with a tamper-resistant screw 

to prevent removal of the outer cover. To reduce the risk of fire or 
electrical shock, do not attempt to remove the outer cover. There are no 

user-serviceable parts inside. Repair should be done only by authorized 
service personnel. 

Note:

 If the power cord is damaged, please contact the warranty 

department listed in these instructions. 

Customer Care Line: 1-800-465-6070

For online customer service:  

www.prodprotect.com/blackanddecker

At the end of this product’s life, you can mail it to Spectrum Brands at  

507 Stokely Drive, DeForest, WI  53532 marked “Product Takeback: 

Please Recycle!”
BLACK+DECKER and the BLACK+DECKER logos are trademarks of The 

Black & Decker Corporation, used under license by Spectrum Brands, Inc. 

for its manufacturing and sale of this product. All rights reserved. 
© 2021 Spectrum Brands, Inc. All rights reserved. 

Spectrum Brands Inc., Middleton, WI 53562
Made in China. 

Содержание Elite Digital Pro Series












Отзывы: