Black & Decker BL355, Руководство пользователя

Страница: 4 / 16

4
ENGLISH
Electrical safety
#
This appliance is double insulated in accordance
with EN 60335; therefore no earth wire is required.
Always check that the power supply corresponds to
the voltage on the rating plate.
!
To avoid the risk of electric shock, do not immerse
the cord plug or motor unit in water or other liquid.
Overview
This appliance includes some or all of the following features.
1. Speed control switch
2. Blade assembly
3. Jug
4. Lid
5. Pouring hole cover
Assembly (fig. A)
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Assembling the jug (fig. A)
u
Place the seal (9) on the blade assembly (2).
u
Position the blade assembly in the underside of the jug (3).
u
Rotate the blade assembly counterclockwise to lock it into
place.
Warning! Do not overtighten the blade assembly.
u
Place the lid (4) on the jug.
u
Turn the lid (4) clockwise until it locks into place.
u
Place the pouring hole cover (5) in the lid (4).
Warning! Take care when emptying the jug and when
handling the blades as they are very sharp.
Fitting and removing the jug (fig. A)
u
Position the jug (3) on the motor unit, aligning the lugs (6)
with the recesses (7).
u
Fix the jug by turning it clockwise until the lugs (6) engage
in the slots (8).
u
To remove the jug, turn the jug counter-clockwise and take
if off.
Use
Warning! Always place the unit on a flat, clean and non-slip
surface before operating it.
Switching on and off
u
In order to briefly switch on, turn the speed control switch
(1) to position P. To switch off, release the switch.
u
For longer operation, turn the speed control switch (1) to
position 1 (low speed) or 2 (high speed). To switch off, turn
the switch to position 0.
Warning! Do not operate the appliance continuously for more
than 2 minutes. After operating the appliance
continuously for 2 minutes, let it cool down for at
least 10 minutes before operating it again.
Blending
Before fitting the lid (4) add the ingredients. The ingredients
can be topped up by inserting them through the pouring hole.
Warning! Never operate the appliance without the lid.
Warning! Take care when emptying the jug and when
handling the blades as they are sharp.
u
Set the unit up for blending as described above.
u
Open the pouring hole or remove the lid (4).
u
Add the required ingredients into the jug (3).
Warning! Do not exceed the MAX level (1.4 litres).
u
Fit the lid and pouring hole cover onto the jug.
u
Operate the appliance as described above. It is
recommended to start at low speed, then change to high
speed if necessary.
u
Turn the jug counterclockwise and lift it off the motor unit.
u
Remove the lid.
u
Pour the ingredients out.
After use
u
Remove the jug from the appliance.
u
Remove the lid from the jug.
u
Pour the ingredients out.
Hints for optimum use
Operating times
Blender
Time (s) Speed Maximum quantity
Liquids 25-35 1-2 1.4 l
Semi liquids 15-20 1 1 l
Cleaning and maintenance
Warning! Be careful when cleaning the blades as they are
sharp.
Warning! Before cleaning and maintenance, switch the
appliance off and unplug it.
u
Always clean the appliance immediately after use.
u
Wipe the motor unit with a damp cloth. Do not immerse
the motor unit or blender base in water. Wash the other
parts in warm water and dry carefully.