Black & Decker BDPSC101 Скачать руководство пользователя страница 15

Страница: 15 / 17

Check the drive belt carefully for wear, cuts and stressed areas. If the drive belt

appears worn, you will need to replace it.

To remove the drive belt, read the instructions and follow the drawings below:

1. Grasp the old drive belt and remove from motor shaft. Discard old drive belt.

2. Loop new drive belt over motor shaft and stretch other and over floor brush in the

space provided between the bristles.

3. Place ends of floor brush down into slots on sides as shown.

4. Turn floor brush by hand several times in the driection of the motor shaft. If

properly installed, drive belt will align itself on floor brush.

5. Replace brush cover and seven screws.

Maintenance And Care - Replace Drive Belt

WARNING:

Turn off and unplug vacuum cleaner before performing

maintenance to the vacuum cleaner.

WARNING:

The plug must be removed from the power socket before

any maintenance or replacement. If the power cord is damaged, replace them only

by the factory or maintenance center or similarly qualified persons.

Replace Brush

Cover and

Seven Screws

Содержание BDPSC101


















Результаты поиска

Содержание BDPSC101

Отзывы:

Похожие инструкции для BDPSC101

Бренды по названию

Популярные бренды

Black & Decker BDPSC101, Инструкция по эксплуатации

Результаты поиска

Содержание BDPSC101

Отзывы:

Похожие инструкции для BDPSC101

Бренды по названию

Популярные бренды