Black & Decker BDCR18, Оригинальное руководство пользователя

Страница: 8 / 84

8
ENGLISH (Original instructions)
Blades
The saw will accept a blade up to 30 cm long. Always use the
shortest blade suitable for your project but long enough to
keep the blade cutting through the material. Longer blades are
more likely to be bent or damaged during use. During opera-
tion some longer blades may vibrate or shake if the saw is not
kept in contact with the workpiece.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Technical data
BDCR18 (H1)
Input voltage
V
DC
18
No-load speed
Min
-1 0-3000
Stroke length mm 22
Weight kg 1.5
Charger 905902**/N4940** 905998**/906349**
Input voltage V
AC
100-240 220-240
Output voltage V
DC
8-20 8-20
Current A 400 1000
Approx. charge time Hours 3-11 1.5-5
Battery (where supplied) BL2018* BL1518* BL4018
Voltage V
DC
18 18 18
Capacity Ah 2.0 1.5 4.0
Type Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 81 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 92 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Cutting boards (a
h,B
) 6.2 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting wooden beams (a
h, WB
) 2.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Supply of Machinery (Safety)
Regulations 2008
BDCR18 - Reciprocating Saw
Black & Decker declares that these products described under
“technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-11:2016.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Black & Decker
Ed Higgins
Director - Consumer Power Tools
Black & Decker UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
United Kingdom
06/01/2021