BKR5000 Portable Radio User’s Manual
- 59 -
NOTE: $F7F is an invalid receiver NAC.
Choose “Select” to use a receiver NAC from the programmed pick
list.
Squelch Mode
Digital or Mixed Mode Receive Channels Only
Normal
- Requires carrier and NAC only to unmute digital
signals.
Selective
- Required for Individual Calls and use of Talkgroup
IDs. Requires a matching TGID to unsquelch.
Bandwidth
Analog or Mixed Mode Channels Only
Narrowband
- 12.5kHz spacing when operating in analog.
Wideband
- 25kHz spacing when operating in analog.
Tx Power
Low Power
- Lock channel in low power mode.
High Power
- Lock channel in high power mode.
Selectable
- Allow high/low transmit power selection form
assigned button, switch or menu item.
Tx Frequency
Enter a valid receive frequency in MHz. Frequencies must be
divisible by 1.25kHz.
Tx Mode
Select Analog, Digital or Selectable.
Tx Guard
Analog or Mixed Mode Receive Channels Only
Select “Off” for analog signals to operate in carrier squelch mode.
Select “Tone” to enter a CTCSS tone,
Select “Digital” to enter a DCS value.
Use “INV” to invert a DCS tone.
Tx NAC
Digital or Mixed Mode Transmit Channels Only
Select “Enter” to program a transmit NAC via the keypad.
Enter the desired value in hexadecimal (000 - FFF).
