BK TECHNOLOGIES BKR5000 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 71

background image

BK Technologies

- 46 -

Contrast

Conventional and Trunking Channels

Allows the user to adjust the contrast of the screen.
Select the desired contrast using the -/+ buttons.
Press "ENTER" to set the contrast.

Control Lockout [LCK]

Conventional and Trunking Channels

The BKR5000 portable offers a variety of control lock options. Control

lock can be assigned to a collar switch or as a button or menu item.

Switch Assignment

When assigned to the collar switch, toggling the switch on locks all

controls except the collar switch, PTT and volume/off.

Button/Menu Assignment

When assigned as a button or menu item, users can select from two

lockout settings, “Lock Keypad Only” and “Lock All Controls”.
“Lock Keypad Only” locks only front panel button operations.
“Lock All Controls” locks all buttons and switches as determined by

radio programming. Any or all of the following function may be locked

when “Lock All Controls” is selected: Front keypad, side top buttons,

channel knob, collar switch and push-to-talk.
To enable the lock function press the assigned button or open the menu

and select Control Lock from the list.
Select the desired lockout setting and press “ENTER”
To disable Control Lock press the diamond button twice, then the

square button twice.

Date and Time [DATE]

Conventional and Trunked Channels

Displays the date and time. The edit button allows the user to change

the date and time. The time will stay stored in the radio when powered

off.

«
...
48
49
50
51
52
...
»

Содержание BKR5000








































































Отзывы:

Нет отзывов

Похожие инструкции для BKR5000

Бренд: E-Tech Страницы: 14

Бренд: IDT Страницы: 13

Бренд: Briggs & Stratton Страницы: 28

Бренд: Bush Страницы: 9

Бренд: LEXIBOOK Страницы: 116

Бренд: Nikkei Страницы: 2

Бренд: VDH Products Страницы: 78

Бренд: Jam Audio Страницы: 2

Бренд: Denver Страницы: 29

Бренд: Uniden Страницы: 14

Juice Go SJUGOBL15E

Бренд: Sandstrom Страницы: 88

Бренд: Harman Kardon Страницы: 8

Бренд: i-box Страницы: 56

Бренд: Craig Страницы: 2

Бренд: Curtis Страницы: 1

Бренд: Curtis Страницы: 22

Бренд: Curtis Страницы: 24

Бренд: International Receiver Company Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды