BK TECHNOLOGIES BKR5000 Скачать руководство пользователя страница 53

Страница: 53 / 71

BKR5000 Portable Radio User’s Manual

- 49 -

Phone [PHN] and Hang Up [HANG]

Conventional Channels

The Phone function is a way for a conventional radio to instruct the

system to dial a phone number and begin a call with that radio. Using

the Hang Up button allows the user to end that call.

Radio Accountability Tone [RAT]

Conventional and Trunked Channels

The Radio Accountability Tone transmits a preprogrammed sequence

of DTMF tones when the RAT button is pressed and held. Must be

programmed with a Radio Accountability Tone ID in the PC Radio Editor.

Radio info

Conventional and Trunking Channels

Information about your radio can be viewed via the “Radio Info” menu

item.
To review the information, open the Radio Info menu. Use the NEXT or

PREV to view individual items.
Radio Info information includes:

UID

- P25 Unit ID.

- IP Address of the radio.

OTAR Registered

- Acknowledges if radio is registered to an OTAR

system.

Up Time

- Amount of time the radio has been on.

Repeater Talkaround [T/A]

Conventional Channels

In Repeater Talkaround mode, the radio will transmit on the programmed

receive frequency of the selected channel. When T/A is enabled the

icon will be displayed on the top line of the LCD.

NOTE: Channels programmed as receive only are not affected by the

Talkaround selection.
Talkaround selection can be assigned to a switch, button or as a menu

list item.

Send Alert Tone [SNDT]

Conventional and Trunking Channels

When pressed and held, the radio will transmit a 781.3Hz tone for the

programmed duration. Duration can be set in the range from 0.5 to 5

seconds.

Содержание BKR5000








































































Результаты поиска

Содержание BKR5000

Отзывы:

Похожие инструкции для BKR5000

Бренды по названию

Популярные бренды

BK TECHNOLOGIES BKR5000, Руководство пользователя

Результаты поиска

Содержание BKR5000

Отзывы:

Похожие инструкции для BKR5000

Бренды по названию

Популярные бренды