23
F1: Continuous
– Selects continuous output.
F2: Triggered
– Triggers one output cycle of the selected waveform for each trigger event.
F3: Gated
– Triggers output cycles as long as the trigger source asserts the gate signal.
F4: Burst
– Triggers ‘N’ number of output cycles for each trigger event, where N ranges
from 2 to 65,535.
After selecting the TRIGGERED, GATED, or BURST menu, the trigger source menu is available:
Figure 8 - Trigger Menu
F1: Manual
– Selects manual as the trigger source. To trigger the waveform generator, press
this MANUAL trigger button again.
F2: Internal
– Selects the internal trigger generator as the trigger source. Change the
internal trigger rate displayed with the rotary input knob.
F3: External
– Selects the external trigger signal as the trigger source. The trigger source is
supplied through the TRIG IN connector.
In BURST MODE, the F4 key displays N-Burst, representing the number of burst cycles to output with
each trigger. The N value can be changed from 2 to 65,535.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
