SB-600-2
19
1
Introduction
The Ammonia Compressor Packs (ACP) are intended
for incorporation into machines in accordance with the
2006/42/EC Machinery Directive. They may only be put
into operation if they have been installed into the ma-
chines according to these Mounting/Operating Instruc-
tions and if the overall installation complies with the ap-
plicable legal provisions (applied standards: see declar-
ation of incorporation).
The electrical components comply with the EU Low
Voltage Directive 2014/35/EU. Moreover, the pressur-
ized components must comply with the EU Pressure
Equipment Directive 2014/68/EU.
The Ammonia Compressor Packs (ACP) have been
built in accordance with state-of-the-art methods and
current regulations. Particular importance was placed
on user safety.
These Operating Instructions must be kept available
near the refrigeration system during the whole lifetime
of the ACP.
1.1
Also observe the following technical
documents
• SB-510 Operating Instructions open screw com-
pressors OS.85
• SB-520 Operating Instructions open screw com-
pressors OS.95
• SH-510 Applications Manual open screw com-
pressors OS.85
• SB-511 Supplement "Booster" to Applications
Manual SH-510 open screw compressors OS.85
• DB-300 Operating Instructions oil separator
• DB-600 Operating Instructions pipelines for ACP
• SW-100 Tightening torques for screw connections
on screw compressors
• ST-500 Properties of oils for screw compresssors
• The manufacturer's documentation comprised in the
scope of delivery concerning the different compon-
ents
