Bittner Audio - Application Handbook
Page 29
3.5.3.
Front View
3.5.4.
Rear View
Connectors and Controls of the rear panel
Inputs
12-pin PHOENIX connector
Outputs
High current 4-pin PHOENIX connector for
channels 1-2 and 3-4 each
Volume Controls
4
Remote Power On
Contact 7 to 10 of the 10-pin PHOENIX connector
Alive Contacts
Contact 1 to 6 of the 10-pin PHOENIX connector
1 contact for 2 channels each (1+2, 3+4),
function can be used as open or close contact
DIP Switch with 2 switches
Switch 1 + 2: Sets the address of amp if connected to an SXL
SXL Data port
15-pin Sub-D Connector
Power
Power switch
3.5.5.
SXL Data Port
The Bittner Audio amplifiers of the 4X series are equipped with the
SXL data port to connect to an SXL Programmable Control
Interface to the amplifier (refer to 3.7. SXL - Programmable Control
Interface Seite 33).
To connect the amplifiers to the SXL all amplifiers must have a
unique address. The address is selected on the DIP switch at the
rear panel of the amplifier.
Address SW1 SW2
ID 1+2
OFF OFF
ID 3+4
ON
OFF
ID 5+6
OFF ON
ID 7+8
ON
ON
