Page 12
Bittner Audio - Application Handbook
2.10.
Operation Modes
On the rear of the amplifier three different operation modes can be selected on the DIP-Switch
panel:
˜
STEREO
˜
PARALLEL
˜
BRIDGED MODE
The amplifier must be re-powered before the mode change is activated.
If the amplifier doesn't have a switch, the operation mode has to be set up by the wiring of the
inputs and loudspeaker outputs.
2.10.1.
Stereo Mode
For stereo operation set the mode select switch to STEREO (factory default). Models without a
switch are automatically working in stereo mode. Please connect the input signals for both
channels to the input connectors of CH1 AND CH2.
Stereo operation with two independent channels:
3
1
2
3
1
2
2-
2+
1-
1+
+
2-
2+
1-
1+
+
CH 1
CH 2
Bridged
Parallel
Stereo
Eingang
Eingang
Stereo operation with a two-way loudspeaker cabinet (both channels connected to SPEAKON
connector 1):
3
1
2
3
1
2
2-
2 +
1-
1 +
+
2-
2+
1-
1 +
+
C H 1
C H 2
B ridged
P arallel
S tereo
Eingang Tiefton
Eingang H ochton
C H 1
C H 2
Input
Input
Input Low
Input High
