BITREK BI-810 TREK, Руководство по эксплуатации

Страница: 15 / 44

15
www.bitrek.com.ua
sales@bitrek.com.ua
+380 44 507 02 07
Detailed Description of Controlling Commands
Command of complete device CPU reset – cpureset;
There is no response to this command. Once the command is received,
all processes of the device reset.
Restoration of profile parameters defaults – rstallprof;
There is no response to this command. Once the command is received,
all profile parameters are restored to their default values.
Command for deletion of all records saved – deleterecords;
There is no response to this command. Once the command is received,
all data packets are removed from the device memory.
Set parameter values by their ID - setparam #### #;
ID consists of 4 digits – the first digit is a profile number, the last three
specify ID of a parameter (refer to
Addendum 1 ).
Command example => set the ID=0242 parameter value: setparam
0242 www.kyivstar.net;
No. Parameter
name
Description
1 Param ID Parameter ID
2 New Value New value of a parameter
Example of a response to the "setparam 0242 www.kyivstar.net"
command - setting an APN:
Param ID 0242 New Val: www.kyivstar.net
Device firmware update - BOOT #,#,#;
Command parameters:
HOST – IP address of the server containing the update;
PORT – Port of the server containing the update;
PATH – Path to the firmware update file on the server;
Example of the command:
BOOT fw.bitrek.ua,80,*.bin;
Where * is a version of the firmware, .bin – file format extension.
Options of response to the attempted update download:
BOOT: UPDATE DOWNLOAD OK – downloading was a success;
BOOT: WAITE ERROR – wait timeout was exceeded during update
download;
BOOT: HOST CONNECT ERROR – failed to connect to the server;
BOOT: PAGE LOAD ERROR – failed to download the file;
BOOT: UPDATE DOWNLOAD ERROR
– failed to update the firmware;
Setting Operating Mode of Digital output OUT1 - setdigout #;