19
Figure 5 - Generation of event by returning to the range.
1 - Leaving the range.
The event will be generated if the actual sensor value is outside the
predetermined range.
Example: The lower voltage limit is set to 0, the upper limit is set to
10 V (10 000 mV). Rising of the voltage above 10 V will generate the
event (see Figure 6).
Figure 6 - Generation of event by leaving the range.
2 - Returning/leaving to/of the range.
Event is generated every time when the actual value of the sensor is
out of the limits of the predetermined range.
Example: The lower voltage limit is set to 5 V (5 000 mV), the upper
limit is set to 10 V (10 000 mV). When the actual voltage crosses
limits of the specified range, then event is generated (see Figure 7).
