14
Example of the command to request APN of the device (a parameter that
contains the APN device has ID 0242) - getparam 0242;
Example of response:
«Param ID 0242 Val: gps.utel.ua».
List of control commands to operate the device
Table 4 - List of control commands to operate the device
No.
Command
Description
Availability
of
response
1
cpureset
Reload of device processor
no
2
rstallprof
Restoring of original state of profile
settings
no
3
deleterecords
Deletion of all saved records
no
4
setparam
####
Set the value of the parameter by ID
yes
5
boot #,#,#
Update of device software
yes
6
setdigout ##
Set the mode of operation of digital
outputs Out 1 and Out 2.
yes
7
ignitionoff
Activation of the safety locking of
ignition
yes
8
ignitionon
Deactivation of the safety locking of
ignition
yes
Notes to Table 4.
Reload of device processor.
Command to be send - cpureset;
No response is returned for this command. Receipt of the command
initiates a complete restart of all device processes.
Restoring of original state of profile settings.
Command to be send - rstallprof;
No response is returned for this command. Receipt of this command
initiates reset of profile parameters to default ones.
Deletion of all saved records.
Command to be send - deleterecords;
No response is returned for this command. Receipt of the command deletes
all the data packets from the device memory.
Set the value of the parameter by ID
Command to be send - setparam ####;
Parameter ID (####) consists of four digits and indicates the number of
the parameter. All configurable parameters are specified in the list of
device parameters (see
Appendix 1
and
Appendix 2
).
