w w w . b i s s e l l . c o m
A
ssembly
1.
Connect swivel hose by firmly inserting it
into the suction opening on the canister.
The hose will click into place when
correctly inserted.
2.
Connect telescoping extension wand to
the handle end of the flex hose. Twist
slightly to tighten.
3.
Connect floor nozzle to the end of the
telescoping extension wand. Twist
slightly to tighten.
4.
To extend telescoping wand, press down
on the black button, in the direction of
the arrows, with one hand and firmly
grasp and pull out extending portion
of the wand to desired length with the
opposite hand.
5.
Once assembled, you can store your
vacuum in one of two positions:
a.
Storing in the in-use position:
To store with the floor nozzle
attached, insert the storage clip
(located on the back of the floor
nozzle) into the storage slot on the
rear of the vacuum.
b.
Storing in the upright position:
To store with the floor nozzle
attached, stand the vacuum in the
upright position and insert the stor-
age clip (located on the back of the
floor nozzle) into the storage slot on
the bottom of the vacuum.
5
1
3
2
WaRning:
Plastic film can be danger-
ous. To avoid danger of suf-
focation, keep away from
babies and children.
a.
storing in the in-use position
storing in the upright position
b.
