Brush Up
w w w . b i s s e l l . c o m
0
perations
6
Power cord
the power cord is located at the rear
of the vacuum. gently pull out the
power cord, watching for the yellow
line. stop pulling the power cord once
the yellow line is visible. there is also
a red line, which indicates the end of
the usable cord. do not pull the power
cord out beyond the red line.
automatic cord rewind
your vacuum is equipped with an
automatic cord rewind. When
cleaning is finished, press the power
button off and grasp the plug to
disconnect from the electrical outlet.
Hold the plug and press the automatic
cord rewind button to rewind the cord
automatically.
Power button
turn the power on or off by pressing
lightly downward on the power button
( ).
special tools
your bissell PurePro is not only a
powerful carpet and rug vacuum
cleaner, it’s also a versatile bare floor
vacuum cleaner and above floor vacu-
um cleaner when you select one of the
special tools.
floor nozzle:
Use to vacuum carpets, rugs and bare
floors. Swivel head turns to get into tight
spaces and fits under cabinets.
1.
To vacuum carpets and rugs, push the
brush switch to the carpet position .
This will pull the brushes up into the floor
nozzle.
2.
To vacuum bare floors, push the brush
switch to the bare floor position .
This will extend the brushes down from the
floor nozzle.
upholstery tool:
Use the upholstery tool to clean curtains,
draperies, cushions and fabrics.
note: use the air flow regulator
to reduce air flow as needed when
using the upholstery tool.
caution:
Before using your vacuum, make
sure that the dust bag and all filters
(pre-motor and post-motor) are in
place. Do not operate your vacuum
without the dust bag and filters.
Power Button
caution:
Be careful to avoid injury as cord
retracts very quickly.
Automatic Cord
Rewind Button
1.
2.
Brush Down
