The Powerfoot on your BISSELL Lift-Off Spinpower
vacuum can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to
the lowest practical setting. If your cleaner is
difficult to push, adjust to the next higher setting.
Place Handle in Upright Position.
Turn Height Adjustment Knob to desired setting.
Lowest Setting
–
For bare floors.
Medium Settings –
For short and medium
pile
carpets.
Highest Setting
–
For plush pile carpet.
NOTE: You may also adjust the setting while in the Normal
Cleaning Position.
Your BISSELL Lift-Off Spinpower vacuum is not only
a powerful floor vacuum cleaner, it’s also a versatile
stairs and above floor vacuum when you select one of
the special tools.
Note: The tools can be used with the
vacuum in the Upright Position or with the
Detachable Cylinder.
Detach the Vacuum Hose by grasping the Hose Grip and
lifting to separate from the Hose Grip Base.
Attach tools by firmly pushing onto Vacuum Hose or Metal
Telescoping Extension Wand.
Combination Dusting Brush/Upholstery Tool:
Two types of cleaning tools are included in one attachment;
rotate for desired tool.
■
Use Brush side to dust furniture, blinds, books, lamps,
shelves, and baseboards.
■
Use Upholstery side for curtains, draperies, cushions,
and fabrics.
Crevice Tool:
Use in tight narrow spaces.
Metal Telescoping Extension Wand:
Use with desired attachment for a longer reach.
To extend the Wand, grasp the collar and push away
from you. The collar will automatically lock into place. To
retract, pull the collar toward you. The collar will
automatically relock.
Stair Cleaning Tool (Select Models):
Use for stairs, area rugs, and other small carpeted areas.
This tool can also be used for
bare floors
.
Note: The Stair Cleaning Tool does not store on board.
1.
Power Height Adjustment
7
Tip:
Before cleaning under
low furniture, check
area first for objects
that might harm the
unit or block the
Vacuum Hose.
Special Tools
2.
1.
2.
CAUTION:
Always place vacuum cleaner on
floor in its fully Upright Position
and make sure it is locked into
place before removing Cylinder
or when using tools. Placing
the Lift-Off Spinpower in its full
Upright Position automatically
stops the rotating brush.
ATTENTION BERBER
CARPET OWNERS:
Some Berber Carpets have a tendency
to fuzz with wear. Repeated passes
with your vacuum over the same area
may aggravate this condition. Consider
using the highest height setting or
turning off the Rotating Brush for this
type of carpet.
ug603-5570_3760E_1105.indd 7
ug603-5570_3760E_1105.indd 7
2/2/06 4:12:13 PM
2/2/06 4:12:13 PM
