BISSELL.com
7
1.
Pull up on brush roll window.
Pull the brush roll tab to
remove and place in drying
tray. Brush and window can be
hand washed.
2.
Remove the machine from
the dock and wipe out the tray.
Do NOT rinse under faucet.
This keeps water out of the
charging plug.
3.
Remove filter from the top
of the tank by pulling it up.
4.
Wash filter and screen with
warm water and mild detergent.
Rinse the bottom of the tank
cover, including mesh screen.
5.
Leave all parts out to dry
before reassembling.
6.
Reinstall brush roll. Place
end of brush into right side of
foot. Press tab of brush down
to lock into place.
7.
Align window tabs with
grooves on foot. Press window
back so it clicks into place.
8.
Store machine in a protected, dry area. Since this product
uses water, it must not be stored where there is danger of
freezing. Freezing will damage internal components and may
void the warranty.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
After-Cleaning Care
Go to
global.BISSELL.com
for a full list of how-to videos.
