6
BISSELL.com
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
Using the Clean Out Cycle
Note:
Empty the dirty water tank prior to cleaning the machine.
1.
Place the machine on the dock. Add water to
reach the Clean Out Cycle line if needed.
2.
Press the Clean Out Cycle Button to start the
40-second cycle.
Note:
If the battery runs out, the Clean Out
Cycle cannot run until your machine has been
charged for up to 30 minutes.
Emptying the Dirty Water Tank
1.
Press the button on the top
of the tank, grab the front
handle and pull tank out.
2.
Hold tank lid near sides of
filter and pull up. Pull strainer
to separate debris for disposal.
3.
Pour dirty water into utility
sink or similar receptacle for
waste water. Rinse the tank.
