background image

Product Overview

1. Handle
2. Stretch Hose
3. Wand Release Button
4. Tank Release Button
5. Carry Handle
6. Suction Indicator

7. Dirt Tank
8. Cord Rewind Button
9. Power Pedal
10. Recline Pedal
11. Height Adjustment
12. Edge Bristles

Go online for a comprehensive walkthrough  

of your new purchase!

This guide has everything you need to get ready for first use, 
including setting up, using and maintaining your machine, 
but online you’ll find additional resources like tips and 
troubleshooting, videos, product registration, parts, and more.  
Go to 

support.BISSELL.com

.

Important Safety Instructions ................................2
Warranty ...............................................................................2
What’s in the Box? .........................................................3
Assembly ..............................................................................3
Using the Vacuum ..........................................................4
Emptying the Dirt Tank...............................................5
Maintaining the TurboEraser® Tool .....................6
Cleaning the Pre-Motor Filter .................................6
Replacing the Brush Roll and Belt ......................7
Clearing a Clog .................................................................7
Troubleshooting ...............................................................8

CLEANVIEW® SWIVEL REWIND 

PET REACH 

UPRIGHT VACUUM

3197 SERIES

1

2

5

7

9

10

12

3

6

4

11

8

Содержание CLEANVIEW 3197 Series









Отзывы: