Bissell CLEANVIE PROHEAT 46L5-F, Руководство пользователя

Страница: 16 / 20

www.BISSELL.com
16
Troubleshooting
Problem Possible causes Remedies
Heat indicator
light does not
illuminate
The heater switch is not turned on. Turn on the heater switch located on
side of unit.
The machine power switch is not
turned on.
Both switches must be on to activate
the heat indicator light.
Reduced
spray OR
no spray
Bladder may be empty. Turn power switch off; refill bladder
with clean hand hot tap water and
formula.
2-in-1 water tank may not be seat-
ed properly.
Turn power switch off; remove tank
and reseat.
Pump may have lost prime. Turn power switch off; after 1 minute
turn on and depress spray trigger.
Pump belt may be broken.
Press power pedal
off and unplug
from outlet. Follow pump belt removal
& replacement instructions on page 15.
DirtLifter
PowerBrush
does not turn
The brush belt or pump belt is off
or broken.
Press power pedal and unplug
from outlet. Follow brush and
pump belt removal & replacement
instructions on pages 14 and 15.
Cleaner
not picking
up solution
ReadyTools dial may be on the
wrong setting for the cleaning job.
Set ReadyTools dial to either FLOOR
CLEANING or TOOLS.
Poor tool position. (Hand held
attachments only).
Adjust angle; apply more downward
pressure.
Removable nozzle may not be
properly attached.
Make sure nozzle is on correctly by
slightly raising front of machine to line
up slots on the base of the machine
with the hooks on nozzle. Attach at
base first and then click nozzle into
place. Refer to image 5 on page 9.
2-in-1 water tank lid is not properly
installed.
Re-install lid; refer to image 5 on
page 8.
2-in-1 water tank is not properly
seated.
2-in-1 water tank must be firmly
seated to function; remove and reseat
2-in-1 water tank.
2-in-1 water tank has picked up
maximum dirty water.
Empty 2-in-1 water tank and refill, refer
to the Operation section.
The lint screen may be clogged. Clean out lint screen. Refer to page 9.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do
not return
this product
to the store.
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.