Bissell CLEANVIE PROHEAT 46L5-F, Руководство пользователя

Страница: 8 / 20

Operations
Fill the 2-in-1 water tank
1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove lid,
turn over and locate built in measuring cup.
3. Fill with BISSELL 2X formula to the indicated
fill line on the built in measuring cup and pour
into mouth of the bladder.
4.
Fill the bladder with clean hand hot
tap water.
*Do not boil or microwave water as it can
destroy the bladder.
5.
Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying
position to latch the lid.
NOTE: Remember to secure the lid and
test to make sure it is secure before picking
up the tank.
6. Place tank into machine base, seating
firmly in place. Rotate tank handle back
into latched position.
Carpet cleaning
1.
Plug the deep cleaner into a proper outlet.
Set ReadyTools dial to the FLOOR CLEANING
setting. Turn the power on by pressing the red
power switch on the back of the unit with your
foot. Turn heater switch (located on side of unit)
to the on position. Allow one minute for the
built-in heater to warm up before cleaning.
NOTE: Your deep cleaner will be fully warmed
and will provide optimal performance after
one minute of continuous heated cleaning.
2. With your foot, press the gray handle release
lever located on the back of unit below water
tank to detent handle.
3. While pressing the spray trigger, make one
slow forward wet pass and another back. Let the
built-in heater, BISSELL 2X deep cleaning for-
mula and DirtLifter PowerBrush do the work for
you. Caution: Do not overwet.
4.
Release the spray trigger and make one slow
forward and backward pass over the same area
to remove any residual dirty water and aid in
drying.
5. Repeat cleaning passes until solution being
suctioned up appears clean. Continue passes
without pressing the spray trigger until you can’t
see any more water being suctioned up.
www.BISSELL.com
8
1.
3.
5.
2.
4.
6.
Handle Release Power Switch
Heater Switch
» Thorough vacuuming
before deep cleaning will
prevent early clogging of
the lint trap.
Tip