Bissell CLEANVIE PROHEAT 46L5-F, Руководство пользователя

Страница: 15 / 20

Pump belt removal & replacement
Occasional replacement of the pump belt may
become necessary. If needed, please follow
instructions below.
1.
Turn off machine and unplug from outlet.
Wrap hose and cord on racks.
2. Remove 2-in-1 water tank and set aside.
3. IMPORTANT: Fully recline handle.
4.
Locate the belt access door and insert the flat
end of a screwdriver into the slots on the belt
access door to remove.
5. Flip the unit on its side and use a Phillips head
screwdriver to remove the screw on the red belt
cover and set screw and cover aside.
6.
Remove the screw from the white pivot arm
connector and set screw and connector aside.
7.
Remove the black pivot arm and brush belt. If
worn or damaged, replace with a new brush belt.
8. Remove pump belt and replace with a new
belt by attaching to larger red pulley and then to
the silver motor shaft.
NOTE: Spinning the red pulley a few times will
help center belt and ensure correct assembly.
9.
Reattach brush belt by installing onto toothed
pump pulley and then onto toothed end of
brush.
10.
Reattach pivot arm, white pivot arm
connector and screw.
11.
Reattach red belt cover and screw.
NOTE: Do not over tighten screws.
12.
Reattach belt access door.
If you have any questions or are having trouble
removing, replacing or reinstalling your pump
belt, please call BISSELL Consumer Care.
15
3. 4.
5.
6.
7.
9.
8.
Maintenance & Care