4
Assembling the Appliance
• Insert the handle into the aperture at the top of the head
• Push plastic upper handle section into place which will lock
into place by way of a metal button
unit (Fig.1) and screw the collar in securely (Fig.2).
Changing the pads and plates on your product
• Make sure appliance is not plugged in before fitting pads.
• Invert the cleaning head so that the drive hubs are
accessible (Fig. 3)
• Place the required hook & loop backing plate (for pads) or
brush plate over the hub, making sure the four connectors
are aligned to the holes in the hub (Fig.4).
• Press the plated down to clip into place.
• Always use two plates of the same type, i.e. not 1 brush and 1
pad (Fig.5).
• Simply pull the plates/brushes off to remove and change.
White / blue / yellow pads can be applied directly to the
backing plates and peeled off to remove (Fig.6)
Adjust the height of the handle to suit your needs by
pulling on the extension button (Fig.7).
For additional stability the pro-grip handle can be opened
to enable two-handed use. Depress the button above the
grip (Fig.8) and open the handle (Fig.9)
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
