• Move at a speed of about 1 minute every
1m
2
and follow the diagram for an even
finish (Fig.11).
• Do not leave the product operating in one area
for a prolonged period as this may damage
your floor.
• Once cleaning is complete, turn the unit off by
returning it to its upright position.
Polishing / buffing the floor
• Clean floor thoroughly first before adding your
chosen floor polish / wax
•
If you are using a floor polishing wax or oil, refer
to the manufacturer’s instructions when using with
the Bissell BigGreen Commerical HerculesScrub
and Clean.
.
• Start with the blue cleaning pads initially and
buff to a finish with the yellow pads for a
high-sheen finish.
• Keep the polisher moving. Do not stop in one
place for a long time or it will spoil the finish.
• Once polishing is complete, turn the unit off by
returning it to its upright position.
• A glossy finish may not always be possible; this
depends on the polish/wax used and the type of
floor surface. Sometimes several coats of polish
will enable a glossy finish.
Power Cable Storage
• The electrical power cable can be stored on the
rear of the product using the convenient power
cable storage hooks.
6
(approx. 1minute per metre s
q
uare)
Fig.11
1m
1m
