Bisonte PAZ 6335i, Руководство пользователя

Страница: 89 / 102

Spraying Technique
The following techniques, if followed, will assure professional painting results.
Hold the gun perpendicular to the surface and always at equal distance from the surface.
Depending on the type of material, surface, or desired spray pattern, the gun should be held at a distance of 12 to 14 inches (30 to 35
cm).
Move the gun either across or up and down the surface at a steady rate. Moving the gun at a consistent speed conserves material
and provides even coverage. The correct spraying speed allows a full, wet coat of paint to be applied without runs or sags.
Holding the gun closer to the surface deposits more paint on the surface and produces a narrower spray pattern.
Holding the gun farther from the surface produces a thinner coat and wider spray pattern. If runs, sags, or excessive paint occur,
change to a spray tip with a smaller orifice.
insufficient amount of paint on the surface or you desire to spray faster, a larger orifice tip should be selected.
Maintain uniform spray stroke action. Spray alternately from left to right and
right to left. Begin movement of the gun before the trigger is pulled.
Avoid arcing or holding the gun at an angle. This will result in an uneven
finish.
Proper lapping (overlap of spray pattern) is essential to an even finish. Lap
each stroke. If you are spraying horizontally, aim at the bottom edge of the
preceding stroke, so as to lap the previous pattern by 50%.
For corners and edges, split the center of the spray pattern on the corner or
edge and spray vertically
so that both adjoining sections receive approximately receive approximately
even amounts of paint.
When spraying with a shield, hold it firmly against the
Angle the spray gun slightly away from the shield and toward the surface. This will prevent paint from being forced underneath.
Shrubs next to houses should be tied back and covered with a canvas cloth.
The cloth should be removed as soon as possible.
Titan gun extensions are extremely helpful in these situations.
Nearby objects such as automobiles, outdoor furniture, etc. should be moved or covered whenever in the vicinity of a spray job.
Be careful of any other surrounding objects that could be damaged by overspray.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
89