Assembly
Cont´d
18
Assembly
4350-2113-00 (Rev. 09/06/04)
Assembly
Cont´d
Turn Table Pin Installation
the offset plate assembly (3) to one of the
seven positions available. Secure with turn table pin
(7) and safety pin (24) through the holes in the turn
table (2) and the offset plate assembly (3).
D.
Angle
2.
3.
7.
24.
Turn Table
Offset Plate Assembly
Turn Table Pin
Safety Pin, 1/8
Figure 11.
Turn Table Pin Installation
RB092
Attach Turn Table to Moldboard
C.
Secure king pin (10) to the moldboard (4) by using
the king pin cap (21) and castle nut (22). Secure using
cotter pin (16).
NOTE:
Remove paint from the moldboard (4) hole
where the king pin (10) goes through if necessary.
Apply grease to all contact surfaces to facilitate
assembly.
Figure 10.
Main Frame and
Turn Table
Installed to Moldboard
Moldboard
King Pin
Cotter Pin, 5/16 x 3
King Pin Cap
Castle Nut, 1 1 /2
4.
10.
16.
21.
22.
RB091
22
21
16
4
10
2
24
7
3
