Assembly
Cont´d
DANGER OF CUTTING EDGE FALLING
It could cause serious injuries or even death.
Keep hands and feet out of cutting edge while
it is up.
MAIN ASSEMBLY
These instructions illustrate the sequence of
assembling the parts of the rear blade. We suggest
that you follow this sequence carefully. Assembly of
the rear blade should be done with no less than two
people and the appropriate equipment for making
assembling easier.
The following tools are necessary for assembling
your rear blade:
Two adjustable wrenches or:
One adjustable wrench and:
One 9/16 wrench or 9/16 rachet
One 15/16 wrench or 15/16 rachet
One 1/2 wrench or 1/2 rachet
One 1 1/8 wrench or 1 1/8 rachet
One 1 1/2 wrench or 1 1/2 rachet
One 2 1/2 wrench or 2 1/2 rachet
One rubber mallet
In some cases, it is necessary to make use of a steel
mallet at the time you install the pins. In these cases,
we suggest that a piece of wood be used to soften
the impact between the pin and mallet to avoid
damaging the pin.
DANGER OF BRUISING
Be careful with the pieces joined by pins since they
tend to rotate.
WARNING
WARNING
16
Assembly
4350-2113-00 (Rev. 09/06/04)
