16
9 Operation instructions
9-1 Driving-in method
1. Spread the four swing arms open toward the posts and drive a vehicle in between. Drive the vehicle in
to match the center of the vehicle width direction with the center between the two posts.
2. Stop the vehicle so that its center of gravity will be on the line connecting the centers of the two posts
or within the range illustrated below. For the center of gravity of a specific type of vehicle, refer to its
maintenance manual.
If the center of gravity of the vehicle is outside the range shown below, the vehicle may
lose balance and fall while lifted up. Be sure to stop the vehicle so that its center of gravity
will be within the range shown below.
Warning
<Drive-in method for OSP3500N>
<NSP3500N>
Bring the center of gravity of
the vehicle to within this
range.
◆
Bring the center of gravity of
the vehicle to within this
range.
◆
300
300
300
Position of the arm when driving-in
Driving-in direction
Driving-in direction
