9
4 Names and functions of components
*1 The above illustration represents a three-piece arm model. NSP37 is supplied standard with three-piece arms, while NSP30 and
OSP28 are supplied standard with two-piece arms.
(Optionally switchable to three-piece arms)
■ Control lever
This lever controls the ascent and descent of the lift.
Pull the lever toward the post to turn the motor and raise the lift.
Release the lever to stop the lift immediately.
When the upper limit is reached, the lever will be forced back
and the lift will stop.
Pull the lever forward to lower the lift. Note that the hook control
lever must also be operated to lower the lift.
Release the lever to stop the lift immediately.
1.
M post
2.
S post
3.
M carriage
4.
S carriage
5.
Swing arm (front)*1
6.
Swing arm (rear)*1
7.
Control lever
8.
Hook control lever
9.
Base
10. Base cover
11. Safety rod
12. Hydraulic unit
13. Support rubber pads/supports
14. Restraint device release lever
Control lever
Stop
Lift-up
Lift-dow
n
2.
1.
3.
4.
5.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
14.
MODEL: NSP3500N
