Bischoff & Bischoff Pyro light Optima, Инструкция по эксплуатации

Страница: 8 / 21

Bischoff & Bischoff GmbH | 12.05.2016
EN
15 14
PYRO LIGHT OPTIMA | Lightweight wheelchair Lightweight wheelchair | PYRO LIGHT OPTIMA
8
9
4.2.4 Swinging away the legrests
To make it as easy as possible to get into and out of your B+B folding
wheelchair, you can easily swing the legrests outwards or inwards if
needed without having to remove them (fig. 8).
•
Pull the handle. This opens the locking device.
•
Now you can swing the legrests outwards or inwards.
•
If necessary, fold the foot plates upwards first.
To return to the original position, simply swing the legrest forwards
until it locks into place.
When standing up/sitting down on your
wheelchair, never stand on the footrest, danger of
falling or tipping!
4.2.5 Setting the legrest length
The length of the legrests can be adjusted in five 20 mm steps up to
a total of 80 mm. To do so, remove the Allen bolt (4 mm) and set the
legrest as required (fig. 9)
4.2.6 Angle-adjustable foot plates
The angle of the foot plates can be adjusted:
•
Unscrew the Allen bolt and adjust the foot plate to the required
position by rotating the toothed ring.
•
Retighten the Allen bolt.
10
80 mm
4.2.7 Width of the foot plates
You can adjust the width of the foot plates.
•
Loosen the fastening screw on the foot plate, then you can adjust
the foot plate to a narrower or wider setting (105 mm to 155
mm).
•
Then secure the foot plate by firmly tightening the fastening
screw (Fig . 11).
4.3. Side parts
In order to be able to get in and out more easily, both side parts and
the arm rests can be swung backwards. Operate the locking lever using
light finger pressure (fig. 12) and swing the side part backwards at the
same time (fig. 13).
Do not use the side parts to lift the wheelchair!
To lock the side part, first swing it forwards and allow it to click into
place with light pressure on the armrest
When moving the side parts, ensure that no items
of clothing or other items can get jammed. Before
use, check for firm attachment of the side parts!
4.3.1 Removing the side parts
To get in or out the wheelchair, removing a side part can be helpful. To
do this, loosen the front locking lever as described previously. You can
then loosen the back lock by pulling on the lever. Now you can simply
remove the side part. Re-assembly is then carried out in reverse order.
12
11
14
13