6
3. INSTALLATION
a)
Unpack then product.
b)
If present (depending on the model), it is necessary to unscrew and remove the locking screw for the transportation
placed under the scale, as shown in the figure below:
c)
Level the platform by adjusting the adjustable feet until the bubble under the plate is in the centre of the level. The
stability of the platform is very important.
ALL THE CORNERS MUST REST IN A UNIFORM WAY
. Carefully check that all feet fully rest on the ground and that
the platform, loaded on the corner, is not unstable (if a corner is not resting on the ground its relative foot is easier to
turn).
During installation
BE CAREFUL
to the flat cable, it can be damaged by compression between base and column. To
avoid this it's necessary insert the cable inside the column as shown in pictures.
