BIRO PRO-9, Руководство по эксплуатации и обслуживанию, Страница: 5 / 40

3
INSTALLATION
• ALWAYS Use Qualified Technician and Electrician for Installation.
• ALWAYS Install Equipment in Work area with Adequate Light and Space.
• ONLY Operate on a Solid, Level, Non-Skid Surface.
• NEVER Bypass, Alter, or Modify This Equipment in Any Way From Its Original Condition.
• NEVER Operate With Safety Cover in Raised Position or Removed.
1. Read this Manual thoroughly before installation and operation. Do not proceed with installation and
operation if you have any questions or do not understand anything in this Manual. Contact your local
Distributor, or BIRO first .
2. Install machine on a level, solid, non-skid surface in a well-lighted work area away from children
and visitors.
TO AVOID SERIOUS PERSONAL INJURY
PROPERLY INSTALL EQUIPMENT IN ADEQUATE WORK AREA
• NEVER Operate Without all Warnings Attached.
3. Machine must be properly grounded. Use a qualified electrician to install according to local building
codes.
4. Make sure ON/OFF toggle switch is in “
OFF ” position.
5. Lower Safety Cover into operating position as shown in the picture on the front of this Manual.
6. Uncoil electrical cord and plug into specified, grounded outlet. (Specifications for this machine are found
on the plate located on the back of the case.)
7. With Safety Cover lowered into operating position, turn ON/OFF toggle switch to “ON” position. The
blades will begin to rotate. Make sure machine operates properly and is stable and secure on operating
surface.
KEEP HANDS CLEAR OF SHARP ROTATING BLADES.
8. Raise Safety Cover to check safety interlock switch- machine should turn off.
9. Turn toggle switch to “ OFF ” position.
10. Check placement of all warning labels. Machine is ready for trained operators to process product.
11. Contact your local distributor or BIRO directly if you have any questions or problems with the installation
or operation of the machine.