BIRO PRO-9, Руководство по эксплуатации и обслуживанию, Страница: 14 / 40

12
ASSEMBLY OF PRO-9 TENDERIZER, SCORING
CUTLET AND STAR CRADLE ASSEMBLIES WITH RIGID COMBS
STEP 6:
Place back rigid comb T3117-L in right hand with the
short horizontal end away from you. Place the wide
comb finger closest to you (wide comb finger closest to
right hand cradle end) between the first tenderizer blade
and right hand cradle end on the back blade assembly.
STEP 7:
Place front rigid comb T3116-L in left hand. With
short horizontal end away from you. Place the wide
comb finger closest to you (wide comb finger closest
to right handle cradle end) between the first tenderiz -
er blade and right hand cradle end on the front blade
assembly.
STEP 8:
Unplug electrical cord. Holding the cutting group’s support handle, begin to insert the assembled cutting
group into PRO-9 Tenderizer. Open safety cover, insert coupling ends first and then rotate the right hand
cradle end back counter-clockwise onto the cutting group supports. Make sure coupling ends are locked into
the driving shafts and then pull down cradle lock lever to firmly secure the cutting group. Close safety cover,
plug in electrical cord, turn on toggle switch, and begin operation.