birddog BDA200, Руководство пользователя

Страница: 8 / 20

8
PoE Power Injector
Other than 24VAC power input, BirdDog PTZ camera pro-
vides PoE power as an optional power input.
For PoE power, you must use BirdDog 80W Power PoE In-
jector: model BL-PP80. It provides high PoE power up to the
PTZ camera. Connect this PoE injector to a network switch
and then run Ethernet cable for data transmission and power
up the PoE PTZ camera (Specific model: A200 & A300) for
distance up to 100 meters.
NOTE!
• Disconnect the power from the camera before
mounting.
• Accessories such as the wall mount bracket and the
pendant mount bracket may be necessary during
mounting. For their model, refer to the accessory list
recommended by your dealer.
• The wall bearing capacity and the bracket length must
meet all onsite mounting requirements. You will need
to select a mount type based the actual environment.
Network Switch
IP Data
PoE 80W
48 VDC
100-240
VAC
24
VAC
PoE
Power
Injector
Power
supply
Mounting the camera
NOTE!
• When mounting the camera, please install the bracket
adapter to the bracket first and then mount the camera
to the bracket.
• Tighten all the screws to hold the camera securely.
• For waterproofing, apply sealant between the dome
and the bracket, wall veneer slits, and leading-out
holes of the wall.
Wall Mount
1. Install the wall mount bracket. Get the heads of neces-
sary cable (Wall cable) through the bracket from the wall
outside of the bracket.
2. Pull the wall cable out through the secure ring.
3. Pull the wall cable out through the adaptor and install the
secure ring and adaptor to the bracket.
4. Connect the camera tail-cable to the wall cable. Insert
the cable into the bracket.
5. Install the two screws, insert the camera body head into
the adaptor and turn to hang the camera.
6. Lock up the chain-locker from camera body to the secure
ring.
7. Screw in the adaptor to lock the camera tight.
This camera can provide SDI video output, IP video output
separately and SDI + IP video outputs simultaneously.
The following sections are the instructions of how to use SDI
video output and how to use IP video output.