birddog BDA200, Руководство пользователя

Страница: 7 / 20

7
Installing Your Camera
The following diagrams are for your reference only. See the
actual product to mount your camera.
Check Camera Components and Installation Conditions.
Before mounting your camera, check the device model num-
ber and included contents against the packing list to ensure
components are complete.
Camera Structure:
1. Tail-Cable
2. Security Lock
3. Camera Body
Important
• Verify the bearing capacity of the mounted position
• Verify that the mounted position meets the bearing re-
quirements. Otherwise, you are advised to reinforce the
mounted position for the device weight. For more infor-
mation, see the product datasheet.
• Verify lightning protection and grounding requirements
• Select proper lightning protection devices for the power
supply, video signal interfaces, and RS485 interfaces.
• Ground the terminal properly.
Cable Requirements
Network cable
10/100/1000 Mbps (Gig port) Ethernet Cat6/6a UTP cables
are applicable to the ANSI/EIA/TIA-568A/B and ISO/D. Eight
wires in the network cable need to be inserted in parallel into
the top of the cable connector. The cable connector needs to
be crimped in position. When the cable connector is in posi-
tion, ensure that the metal pieces of the cable connector are
parallel to each other and the clamp of the cable connector
is intact.
SDI Signal Cable
In order to ensure the quality of the installation of the project,
the HD-SDI and 3G-SDI signals have a high data transmission
rate of digital signals, it is necessary to correctly select the
appropriate cable model. In the process of installing a cable,
it should be carefully and carefully, to avoid incorrect to fold,
twist, bend the cable or to apply various kinds of stress to the
cable, so that the signal can be transmitted along the cable
smoothly. Different cable types have different physical char-
acteristics, and the transmission length of the digital signal is
not the same.
Power Input
BirdDog PTZ camera provides 24VAC power input.
Power Cable
Data listed in the below table is applicable to copper cables
that use 24 VAC/24 VDC power supply. The item Core Diam-
eter indicates the conductor diameter.
Power Loss on the Cable for Different Lengths and Differ-
ent Core Diameters
! NOTE: Power supply requirement is 24VAC 2.5 Amp to
ensure proper functionality of PT motor and LED illumina-
tion. Using power supply lower than 24VAC 2.5Amp will
cause camera crashing or insatiability.
Power Connector: Phoenix Connector Description
1. The anode and the cathode are not distinguished for
phoenix connectors of red and black cables.
2. GND: yellow-green color.
Note: GND is used to ground the camera. Ensure that GND
is connected to a reliable grounding point.