BIRD Site Analyzer SA-2000 Скачать руководство пользователя страница 16

Страница: 16 / 124

Bird Site Analyzer

Right Arrow

During:

Marker Control

Moves active marker right one point at a time.

All other times

As defined by the function description.

Up Arrow

During:

Data Entry

Increases the numeric value.

Marker Control

Moves the marker to the maximum trace value.

While pressing

the contrast key

Increases the display contrast.

All other times

As defined by the function description.

Down Arrow

During:

Data Entry

Decreases the numeric value.

Marker Control

Moves the marker to the minimum trace value.

While pressing

the contrast key

Decreases the display contrast.

All other times

As defined by the function description.

Battery LED

The yellow LED lights when the unit is powered

by an external dc power source. When charging

the internal battery pack, the yellow LED blinks.

Once the battery is fully charged the yellow LED

stops blinking.

The green LED lights whenever the unit is on.

Contrast Key

Hold while pressing the up/down arrow keys to

adjust the contrast of the display.

l/0 (On/Off)

Turns the instrument on and off. The key must be

pressed for at least one-half (½) second.

Содержание Site Analyzer SA-2000





























































































































Результаты поиска

Содержание Site Analyzer SA-2000

Отзывы:

Похожие инструкции для Site Analyzer SA-2000

Бренды по названию

Популярные бренды

BIRD Site Analyzer SA-2000, Руководство по эксплуатации

Результаты поиска

Содержание Site Analyzer SA-2000

Отзывы:

Похожие инструкции для Site Analyzer SA-2000

Бренды по названию

Популярные бренды