BIRD Site Analyzer SA-2000 Скачать руководство пользователя страница 123

Страница: 123 / 124

Limited Warranty

All products manufactured by Seller are warranted to be free from

defects in material and workmanship for a period of two (2) years,

unless otherwise specified, from date of shipment and to conform to

applicable specifications, drawings, blueprints and/or samples. Seller’s

sole obligation under these warranties shall be to issue credit, repair

or replace any item or part thereof which is proved to be other than as

warranted; no allowance shall be made for any labor charges of Buyer

for replacement of parts, adjustment or repairs, or any other work,

unless such charges are authorized in advance by Seller.

If Seller’s products are claimed to be defective in material or work-

manship or not to conform to specifications, drawings, blueprints and/

or samples, Seller shall, upon prompt notice thereof, either examine

the products where they are located or issue shipping instructions for

return to Seller (transportation-charges prepaid by Buyer). In the

event any of our products are proved to be other than as warranted,

transportation costs (cheapest way) to and from Seller’s plant, will be

borne by Seller and reimbursement or credit will be made for amounts

so expended by Buyer. Every such claim for breach of these warranties

shall be deemed to be waived by Buyer unless made in writing within

ten (10) days from the date of discovery of the defect.

The above warranties shall not extend to any products or parts thereof

which have been subjected to any misuse or neglect, damaged by

accident, rendered defective by reason of improper installation or by

the performance of repairs or alterations outside of our plant, and

shall not apply to any goods or parts thereof furnished by Buyer or

acquired from others at Buyer’s request and/or to Buyer’s

specifications. Routine (regularly required) calibration is not covered

under this limited warranty. In addition, Seller’s warranties do not

extend to the failure of tubes, transistors, fuses and batteries, or to

other equipment and parts manufactured by others except to the

extent of the original manufacturer’s warranty to Seller.

The obligations under the foregoing warranties are limited to the

precise terms thereof. These warranties provide exclusive remedies,

expressly in lieu of all other remedies including claims for special or

consequential damages. SELLER NEITHER MAKES NOR

ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER

EXPRESS, STATUTORY, OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO

PERSON IS AUTHORIZED TO ASSUME FOR SELLER ANY

OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE

WITH THE FOREGOING.

Содержание Site Analyzer SA-2000





























































































































Результаты поиска

Содержание Site Analyzer SA-2000

Отзывы:

Похожие инструкции для Site Analyzer SA-2000

Бренды по названию

Популярные бренды

BIRD Site Analyzer SA-2000, Руководство по эксплуатации

Результаты поиска

Содержание Site Analyzer SA-2000

Отзывы:

Похожие инструкции для Site Analyzer SA-2000

Бренды по названию

Популярные бренды