BIRD Site Analyzer SA-2000 Скачать руководство пользователя

Страница: 107 / 124

Chapter 10

Computer Software

The Bird Site Analyzer Software is designed to help
you use the Site Analyzer more effectively. The
software enables use of a PC for archiving and
analyzing measurement data.

Features

Multiple Document Interface - allows any number

of trace documents to be open simultaneously.

Intelligent drag-and-drop automatically converts

traces to a common scale for precise and reliable

comparisons.

Documents can be viewed in the frequency or

distance domains, or as a Smith chart.

Data values can be read off the status bar as the

mouse is moved along the trace.

Compatible with other cable and antenna testers

including the Bird AT Series.

☞

NOTE: The Bird Site Analyzer and PCTool

software are no longer compatible with trace data

from the Anritsu Site Master.

Automatic cursor calibration maintains accurate

readouts of trace data even if the x-axis changes.

Supports long file names for easy identification.

Computer Requirements

To install and run the software, your computer system
must meet the following requirements:

Windows 95 or later

486 or better microprocessor running enhanced

mode (66 MHz or better recommended)

1 MB of free memory

Hard disk with 3 MB of free space

1.44 MB Floppy Drive

☞

NOTE: For more instructions refer to the help files
included with the software.

Содержание Site Analyzer SA-2000





























































































































Результаты поиска

Содержание Site Analyzer SA-2000

Отзывы:

Похожие инструкции для Site Analyzer SA-2000

Бренды по названию

Популярные бренды

BIRD Site Analyzer SA-2000, Руководство по эксплуатации

Результаты поиска

Содержание Site Analyzer SA-2000

Отзывы:

Похожие инструкции для Site Analyzer SA-2000

Бренды по названию

Популярные бренды