BIRD 4421A, Руководство по эксплуатации

Страница: 15 / 22

Setup
7
Setup
Setup consists of ensuring the 4421A has a power source, internal batteries or
AC power source, and attaching a Bird Power Sensor.

Use the 4421A in a dry, dust-free environment.

AC power source, if used, is 100 - 240 V @ 50 - 60 Hz, 1

.
1. Press the power button on the left side of the 4421A.
2. Connect the sensor cable to one of the sensor cable connectors on the right
side of the 4421A. See
Figure 6
.
3. Connect the remaining end of the sensor cable to a power sensor.
Note:
The 4421A’s display should indicate a sensor has been
connected.
Sensor RF Connections
1. Connect the RF Power Sensor’s output connector to the load.
2. Connect the RF Power Sensor’s input connector to the RF source.
Figure 6 4421A Connections
WARNING
Never attempt to connect or disconnect RF equipment from the
transmission line while RF power is applied.
Leaking RF energy is a potential health hazard.
CAUTION
Do not exceed the RF Power or RF frequency specifications of the RF
Power Sensor.