Page 22
5.7
Adjusting the detector
5.8
Mounting height F+4
5.14
Crossing traffic masking CTM F + 5
5.15
Wide field B
5.9
Comfort functions C
The settings are identified as follows:
e.g.
D+…
Remote control menu
e.g.
P.1…
Primary programming mode with keys, function no. 1
e.g.
S.3…
Secondary programming mode with keys, function no. 3
F + 4 + 1…7
P.2+1…7 (keys)
1 = 2.0 bis 2.4 m
5 = 5.0 bis 5.9 m
2 = 2.5 bis 2.9 m
6 = 6.0 bis 6.9 m
3 = 3.0 bis 3.9 m
7 = 7.0 bis 7.9 m
4 = 4.0 bis 4.9 m
It is essential to adjust the mounting height if it does not match the
factory setting.
5.10
Field size D
D + 1…9
P.4+1…9 (keys)
Levels 1 (small field) to 9 (large field)
Refer to the technical data for field dimensions.
5.12
Direction recognition E+1
5.13
Relay parameter settings E+2
5.11
Relay hold interval F+1
F + 1 + 1…4
S.1 + 1…5 (keys)
1 = 0.2 s
2 = 0.5 s
3 = 1.0 s
4 = 2.0 s
5 = 5.0 s
The relay hold interval only starts after other functions have been com-
pleted (delayed).
These pre-programmed settings allow you to configure the system
quickly and easily for standard applications.
CTM prevents an industrial door from being inadvertently opened by vehi-
cles or persons that are only moving or walking past it but do not want to
pass through the industrial door.
F + 5 + 1 =
Aus
S.3 + 1
F + 5 + 2…9
S.3 + 2…9
Optimum inclination angle for crossing traffic function: 30° to 45°
Crossing traffic masking is not possible with the clip!
B + 1 =
On
S.4 + 1
B + 2 =
Off
S.4 + 2
This option must be activated when the mechanical clip is used for set-
ting a wide field. Please refer to 3.1 for information about clip mounting.
The detector will not function correctly if the wrong setting is made.
Industrial door remains closed
to crossing traffic (level 9)
Industrial door opens to crossing traffic
or when an object approaches laterally
(level 1)
Remote
control
Function
Keys
C + 1
Standard, detects all objects
P.1+1
C + 2
Frontal traffic, all objects
P.1+2
C + 3
High-speed industrial door, all objects
P.1+3
C + 4
Detects slow movements, all objects
P.1+4
C + 5
Standard, differentiation between people and
vehicles
P.1+5
C + 6
Frontal traffic, differentiation between people
and vehicles
P.1+6
C + 7
High-speed industrial door, people suppression
P.1+7
C + 8
Detects slow movements, differentiation
between people and vehicles
P.1+8
Note:
The selected enhanced function is only read back and displayed
as such if no parameters were changed. Please refer to the table of
enhanced functions in 4.6 for more details.
Remote
control
Function
Keys
E + 1 + 1
Forwards, movement towards detector
S.2 + 1
E + 1 + 2
Backwards, movement away from detector
S.2 + 2
E + 1 + 3
Forwards and backwards
S.2 + 3
Remote
control
Function
Keys
E + 2 + 1
Standard industrial door, differentiation between
people and vehicles
P.3 + 1
E + 2 + 2
Standard industrial door, people suppression
P.3 + 2
E + 2 + 3
Standard industrial door, vehicle suppression
P.3 + 3
E + 2 + 4
Standard industrial door, people and vehicles,
same output (relay 2)
P.3 + 4
E + 2 + 5
Standard industrial door, people and vehicles,
outputs with direction segregation
P.3 + 5
E + 2 + 6
High-speed industrial door, people suppression
(relay 2)
P.3 + 6
E + 2 + 7
High-speed industrial door, people and vehicles,
same output (relay 2)
P.3 + 7
E + 2 + 8
High-speed industrial door, people and vehicles,
outputs with direction segregation
P.3 + 8
Please also refer to the table of relay parameter settings in point 4.6!
Field without clip
Field with clip
5.16
Slow Motion Detection (SMD) F+3
The slightest (quasi-static) movements are detected as soon as the detec-
tor is activated. The detector only issues the corresponding signal to the
industrial door controller if no more movement is registered during the set
monitoring period. Sensitivity during this monitoring period can be set to
decrease or remain constant.
