Biotek 800 TS Series, Инструкция по эксплуатации

Страница: 42 / 60

38 | Maintenance Overview
BioTek Instruments, Inc.
Maintenance Overview
A general maintenance regimen for all 800 TS models includes periodically cleaning all
exposed surfaces and decontaminating the instrument before storage or shipment.
Schedule
The risk and performance factors associated with your assays may require performing some of all of
the procedures more frequently than presented in this schedule.
Task Daily Quarterly As Needed
All models:
Clean exposed surfaces x x
Inspect/clean touchscreen x
Inspect/clean the wavelength filters x
Decontamination Before shipment or storage
Warnings and Precautions
Read the following before performing any maintenance procedures:
Warning! Internal Voltage. Turn off and unplug the instrument for all maintenance
and repair operations.
Important! Do not immerse the instrument, spray it with liquid, or use a dripping-
wet cloth on it. Do not allow water or other cleaning solution to run into the
interior of the instrument. If this happens, contact the BioTek Service Department.
Do not soak the touchscreen! This will cause damage. Moisten a clean cloth with
deionized or distilled water and wipe the touchscreen. Dry immediately with a
clean, dry cloth.
Important! Do not apply lubricants to the microplate carrier or carrier track.
Lubricant attracts dust and other particles, which may obstruct the carrier path and
cause errors.
Warning! Wear protective gloves when handling contaminated instruments. Gloved
hands should be considered contaminated at all times; keep gloved hands away
from eyes, mouth, nose, and ears.