Biotage TurboVap 96 Dual, Руководство пользователя

Страница: 16 / 26

16 TurboVap
®
96 Dual User Manual | © Biotage 2021
Evaporate
3. If desired, tick the corresponding box to ramp the settings;
Ramp Gas Flow , Ramp Gas Temp and Ramp Plate Height . If
the settings are ramped, the settings change gradually as
opposed to incrementally changed settings.
Note: Ramped and incremental settings can be mixed.
Note: If the step time is set to zero, the step will not be
executed, see Figure 30.
1 Edit name Edit current method name
2 Time The set evaporation time
3 Gas flow The set gas flow
4 Gas temp The set gas temperature
5 Plate temp The set plate temperature
6 Plate height The set plate height
7 Ramp settings Ramp gas temperature, gas flow and/or
plate height settings
8 Copy from Method Copy settings from one method to
another
9 Up and Down arrows Change a setting step by step
10 Open numpad Change a setting with numeric keypad
11 Cancel Cancel changed settings
12 Save Save changed settings
Figure 28. The Evaporation Parameters view where the evaporation
parameters or the method name can be edited or a method can be copied.
Figure 29. Press and hold the Plate height button, then move the lift by
pressing the Up and Down arrows.
Figure 30. Time is set to zero for step 2, and therefore step 2 will not be
executed.
Copy From a Method
It is possible to copy the evaporation parameters from an
existing method and save them under a new method name.
Note: There are 10 default methods per manifold configuration.
To access them, make sure to configure the correct manifold
settings for the method, see "Common Settings" on page 8.
To copy settings from an existing method, proceed as follows:
1. Press the button Copy from Method in the Evaporation
Parameters view, see Figure 28.
2. In the Copy Method view, select method to copy from, see
Figure 31.
3. Press the Copy Method button.
4. In the appearing view, edit the method name by pressing the
Edit Name
button, see Figure 32.
5. Type in the new method name and press Save .
Note:
Changes made to methods cannot be undone.
Overwritten data will be lost.
Figure 31. The Select method to copy data from view where the method
to be copied is selected.