Chapter1
Motherboard Description
1-19
The Serial Interface Port-II: JCOM2 (Optional)
Signal Name IDC
PIN
DCD
Data Carrier Detect
1
RX Receive
Data 2
TX Transmit
Data 3
DTR Data
Terminal
Ready
4
GND Signal
Ground
5
DSR Data
Set
Ready
6
RTS Request
to
Send 7
CTS
Clear to Send
8
RI Ring
Indicator 9
Special Applications
There are two types of serial devices that can be connected to a serial port. One of
the devices is called “DTE” (Data Terminal Equipment) and the other device is
called “DCE” (Data Communications Equipment). If a modem is connected to a
computer, for example, the modem is called the DCE and the computer is called
the DTE. In situations such as this, the pins on the serial ports can be connected
straight through.
In instances when there are two DTE devices connected together, such as a
computer and a printer, a special adapter called a “Null Modem” is needed to
make communication between the two devices possible.
When using the serial port to communicate between devices, one problem in
particular may arise. Some manufacturers use one set of signals to begin
communication with another device and other manufacturers do not use these
2
1
1
0
9
